Fiber Optic Connector FC/PC Simplex Multimode (10 Pack) / TAA Compliant

Fiber Optic Connector FC/PC Simplex Multimode

• The Beyondtech multimode FC connectors for PC polishing are crafted to provide a low IL (Insertion Loss) and back reflection. They provide high precision and a sturdy mechanical stability.
• FC fiber connector has 2.5mm zirconia ceramic ferrule with a spherical end-face. FC connectors feature a screw-on mechanism that provides accurate connections in high vibration environments.
• Simplex.
• These connectors meet and exceed the IEC 61754-13 and TIA 604-4-B and conform to RoHS environmental requirements.
• FC connector body is made of nickel and has a black color boot, which tolerates corrosion. They are available for (0.9mm or 3mm) cable diameters.
• For more instructions check out the Guide for Optical Terminationsavailable at our store for free download.
• Beyondtech recommends using the adhesive Loctite 648 and the accelerators Loctite 7471 or 7649.
• Beyondtech FC multimode connectors are used in datacom, telecom, measurement and industrial equipment that require a screw-on type of connector. Although considered legacy is still in use in older instrumentation equipment and they are very handy for those older connectors in place.

Beyondtech Certified

Beyondtech’s multimode FC/PC simplex connectors can be attached to cables with the epoxy and polish termination method. Each Beyondtech connector is tested and confirmed to be within the correct optical (IL).

Technical Specs

• FC.
• Color: Black.
• Physical Contact (PC).
• Multimode.
• Simplex.
• Complies with IEC 61754-4, IEC 60784-14 and TIA 604-3.
• RoHS, REACH SvHC compliant.
• Operating temperature: -20°C to +70°C.
• LAN, WAN, SAN and FTTx applications.
• Multimode (both 50/125 and 62.5/125).
• 3.0 mm or 0.9 mm

Installation Procedure